This post was originally published on this site.
The original Priapus grip garnered attention for its distinctive shape and various texture options. This second-generation model retains the core design but adds a molded-texture finish, reduces the price, and arrives as a true off-the-shelf upgrade for AR-pattern rifles and any chassis that accepts AR grips.
Gen 2 Priapus Grip – A Rifle Upgrade
At first look, the Priapus is different from standard AR grips. It is symmetrical, featuring a palm swell and an arched backstrap that positions the hand high and consistently behind the trigger. The front strap is nearly vertical and relatively square, which helps index the hand the same way every time and supports a more neutral wrist angle in prone or off a barricade. The result is a grip that feels part precision rifle, part carbine.
The Gen 2 model is injection molded from a tungsten-infused polymer. The weight is a manageable 2.9 ounces, with a height of 4⅛ inches and a maximum circumference of 5⅛ inches. Those numbers fall into a comfortable middle ground for most hands, which is crucial for a grip designed for a variety of rifles.
Advertisement — Continue Reading Below
Two Versions
You can purchase a Gen 2 Priapus grip with a molded-in texture or in a version featuring recessed panels, designed for grip tape. Since the panels are user-applied, you can mix textures or swap colors to suit your taste. It is an inexpensive way to tune the interface to your environment.
With larger-scale molding, MSRP drops to $24.99. That puts the Priapus in the same dollar range as many generic AR grips while offering more thoughtful ergonomics and a customizable surface. For OEMs and builders producing rifles in volume, cost matters. For individual shooters, trying the shape becomes a low-risk decision.
Advertisement — Continue Reading Below
Arched Backstrap
The arched backstrap guides the web of the hand into a repeatable position, which helps trigger finger placement from a prone to a standing position. The near-vertical angle eases wrist tension during long strings and does well with modern stock geometry. The square front strap provides your fingers with a consistent ledge, which is useful when building pressure into a barricade or settling in behind a bipod.
The Priapus stays slim enough to avoid interference with gloves or chest rigs, yet the palm swell keeps it from feeling narrow. The tungsten-infused polymer gives it a solid hand feel without the chill of bare aluminum. If you run the recessed version, the grip tape panels add real traction without forcing you into a single pattern. Replacement panels cost little, so you can refresh them as needed.
Advertisement — Continue Reading Below
Gen 2 Priapus Grip
The Gen 2 Black Collar Arms Priapus Grip is a practical, well-priced upgrade with a good design. It brings precision-rifle ergonomics to the AR footprint while keeping weight low and options open. If you are ready to upgrade from your stock grip, this is a smart piece of kit to try.
For more information, visit Black Collar Arms.
Advertisement — Continue Reading Below
Gen 2 Black Collar Arms Priapus Grip Specs
| Material: | injection molded from ultra-premium, tungsten-infused polymer |
| Weight: | 2.9 ounces |
| Height: | 4-1/8 inches max length along front |
| Max Circumference: | approximately 5 1/8 inches |
| MSRP | $24.99 |
WHY OUR ARTICLES/REVIEWS DO NOT HAVE AFFILIATE LINKS
Advertisement — Continue Reading Below
Affiliate links create a financial incentive for writers to promote certain products, which can lead to biased recommendations. This blurs the line between genuine advice and marketing, reducing trust in the content.
The post The Gen 2 Black Collar Arms Priapus Grip appeared first on Athlon Outdoors Exclusive Firearm Updates, Reviews & News.
